7.5kw Main Motor Power Downspout Roll Forming Machine Controlled by PLC

Downspout (Down pipe) is a pipe for conveying rain water from a roof or gutter to

the ground, also referred to as Leaderpipe, Downpipe, or Drainspout. The downspouts

are more and more widely applied in rain

water storage solution. Downspout disconnection (sometimes called roof leader disconnection)

represents a cost-effective on-site alternative for reducing the volume and cost of stormwater

that requires publicmanagement. Runoff from residential rooftops is collected by eaves troughs,

which are installed along the edge of the roofline. Water collected in the eaves trough is conveyed to ground level by one or moredownspouts. Downspouts may then connect directly into the storm

sewer system into a combined storm and sanitary sewer system. Disconnecting downspouts brings a number of economic and environmental benefits to the municipality and the homeowner

Our roll forming line of downspout machines run copper, steel, or aluminum. These are also

ideal for piping for the HVAC industry for small sizes ductwork.

Main motor power: 7.5kw

Roll stsands: 19

Shaft diameter:80mm

The whole production line is controlled by PLC

The downspout roll forming machine mainly consists of decoiler, roll forming system,

cutting equipment, protective guard, hydraulic system, control system and

out table. It can make curve for down pipe to meet the requirement of practical

engineering projects.

Technological process of downpipe roll forming machine:
Uncoiling---Feeding---Leveling---Punching----Roll forming---Cutting---Products collecting

Technical parameters:

Steel thickness: 0.5-0.8mm
Forming speed: 8-10m/min
Roller stands: 20 stand
Roller material: 45# steel, coated with chrome
Main motor power: 3kw
Hydraulic cutting power: 7.5kw
Hydraulic pressure: 12Mpa
Power supply: 380V 50HZ 3 phase
Tolerance: 1.5mm
Material of cutting: Cr12
Control system: PLC with touch screen
Machine net weight: 10T

Company introduction

We are located in Jiangyin city, Jiangsu province, specializes in manufacturing various types of high speed, high precision roll forming machines, with more than 20 years’ experience. It has gained highly praise by customers from all over the world, due to top quality and competitive price of the products. Company principle: top quality, low price.

We a professional manufacturer of cold forming equipment (especially high difficulty cold formed steel), wins the trust of customers by its honesty, pragmatic operation philosophy, advanced technology, innovative design thinking, excellent quality, superior after sales service, competitive price, etc.

Main products

We mainly produce all kinds of roof/ wall tile roll forming machine, C purlin, Z purlin, C&Z interchangeable purlin roll forming machine, uni channel forming machine, rack shelf roll forming machine, guardrail roll forming machine, cable tray roll forming machine, metal deck roll forming machine, down pipe roll forming machine, rolling shutter door roll forming machine, auto stacker, EPS/PU sandwich panel production line, slitting line, cut to length line, tube mill, etc, mainly in construction use.

After sale service

1). Engineer will give free training lessons to labors in buyer’s factory.

2). The Buyer will buy the round-trip air ticket for Engineer if visa application is approved. The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD100 for engineer per day.

3). During this guarantee period, we will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, we will provide the buyer spare parts at cost price.

4). We will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide.

Photo of the Factory

Our clients